دانلود کتاب ها (E-book ها) و مقاله هاي مهندسي برق

[asd1234]

ISBN: 0521639220
Title: Design of CMOS Radio-Frequency Integrated Circuits, 1st edition, 1998-01
Author: Thomas H. Lee
Publisher: Cambridge University Press
Publication Date: 1998-01-13
Number Of Pages: 598
Average Amazon Rating: 4.0
This comprehensive and insightful book sets out in detail how to design gigahertz-speed radio-frequency integrated circuits in CMOS technology. Starting with a history of radio to establish a foundation and to differentiate the discrete era from the IC age, the book reviews passive RLC networks, the characteristics of IC components and transistor models. The design of high-frequency tuned and broadband amplifiers follows, with an emphasis on approximate methods

[مشاهده فقط برای اعضا امکان پذیر است . برای ثبت نام اینجا کلیک کنید ...]

[مشاهده فقط برای اعضا امکان پذیر است . برای ثبت نام اینجا کلیک کنید ...]

[asd1234]

ISBN: 0486606368
Title: Treatise on Electricity and Magnetism, Vol. 1, 1954-06
Author: James Clerk Maxwell
Publisher: Dover Publications
Publication Date: 1954-06-01
Number Of Pages: 552
Average Amazon Rating: 4.5
Book Id 41965Editorial Description
Whenever I teach a course which touches on electric or magnetic phenomena I find myself going through this book. It works well with the early chapters of Jackson, in particular, and Smythe. Maxwell knew the subject thoroughly, up to the 1870s (and much of this material has since dropped out of courses and almost out of memory), his thinking was both profound and clear, and he may well be the best writer on physics in the English language. His proofs are economical and elegant. Oh yes - this book is still a good reference for the treatment of spherical harmonics and multipole expansions in Cartesian coordinates.

[مشاهده فقط برای اعضا امکان پذیر است . برای ثبت نام اینجا کلیک کنید ...]

[asd1234]

ISBN: 0849319137
Title: Fundamentals of DSL Technology
Author: Philip Golden, Herve Dedieu, Krista S. Jacobsen
Publisher: AUERBACH
Publication Date: 2004-07-15
Number Of Pages: 472
Average Amazon Rating: 5.0
Book Id 22380
Editorial Description
Fundamentals of DSL Technology begins with an introductory three-chapter examination of DSL copper transmission channels, reviewing the basic telephone environment, the physical-layer twisted pair, and the noise environment in the twisted pair channel. The book then explores line codes - laying the foundation for later chapters about other aspects of DSL design - and discusses the basic objectives of DSL service, comparing DSL to other broadband delivery methods.

[مشاهده فقط برای اعضا امکان پذیر است . برای ثبت نام اینجا کلیک کنید ...]

[asd1234]

ISBN: 0470851635
Title: Electric Vehicle Technology Explained 2003-12
Author: James Larminie
Publisher: John Wiley & Sons
Publication Date: 2003-12-19
Number Of Pages: 314
Average Amazon Rating: 5.0
Book Id 8452
Editorial Description
While the classic battery electric car continues to make only a small impact on the automobile market, other types of electric vehicle, especially hybrids, have made significant and promising improvements. Moreover, small battery electric vehicles such as bicycles and mobility aids are also developing well. Presenting more than 160 diagrams and pictures, this book explains the science and technology behind these important developments, and also introduces the issues that underpin the design.

[مشاهده فقط برای اعضا امکان پذیر است . برای ثبت نام اینجا کلیک کنید ...]

OR

[مشاهده فقط برای اعضا امکان پذیر است . برای ثبت نام اینجا کلیک کنید ...]

[asd1234]

ISBN: 0071441468
Title: Standard Handbook for Electrical Engineers
Author: Donald G. Fink H. Wayne Beaty
Publisher: McGraw-Hill Professional
Publication Date: 2006-08-25
Number Of Pages: 2000
Average Amazon Rating: 4.0
Book Id 51831
Editorial Description
The Standard Handbook for Electrical Engineers has served the EE field for nearly a century. Originally published in 1907, through 14 previous editions it has been a required resource for students and professionals. This new 15th edition features new material focusing on power generation and power systems operation – two longstanding strengths of the handbook that have recently become front-burner technology issues

[مشاهده فقط برای اعضا امکان پذیر است . برای ثبت نام اینجا کلیک کنید ...]

OR

[مشاهده فقط برای اعضا امکان پذیر است . برای ثبت نام اینجا کلیک کنید ...]

[asd1234]

ISBN: 0071402039
Title: Electrician’s Instant Answers (Instant Answer Series)
Author: David Tuck
Publisher: McGraw-Hill Professional
Publication Date: 2003-01-27
Number Of Pages: 365
4.0 Mb pdf
“The Book for Electricians Who Need the Right Answer NOW! Here’s the one on-site reference electricians can’t afford to be without! Electricians’ Instant Answers provides all the information you need to solve just about any electrical procedure problem - quickly, effectively, and economically. Packed with calculations, tips, fast facts, charts, tables, and photographs, Electrician’s Instant Answers features just enough text to get the job done right, without wasting your time.

[مشاهده فقط برای اعضا امکان پذیر است . برای ثبت نام اینجا کلیک کنید ...]

OR

[مشاهده فقط برای اعضا امکان پذیر است . برای ثبت نام اینجا کلیک کنید ...]

OR

[مشاهده فقط برای اعضا امکان پذیر است . برای ثبت نام اینجا کلیک کنید ...]

[asd1234]

ISBN: 0471497487
Title: Electroceramics : Materials, Properties, Applications
Author: A. J. Moulson
Publisher: John Wiley & Sons
Publication Date: 2003-07-07
Number Of Pages: 576
Average Amazon Rating: 5.0
Electroceramics, Materials, Properties, Applications, Second Edition provides a comprehensive treatment of the many aspects of ceramics and their electrical applications. The fundamentals of how electroceramics function are carefully introduced with their properties and applications also considered. Starting from elementary principles, the physical, chemical and mathematical background of the subject are discussed and wherever appropriate, a strong emphasis is placed on the relationship between microstructire and properties. The Second Edition has been fully revised and updated, building on the foundation of the earlier book to provide a concise text for all those working in the growing field of electroceramics.
* fully revised and updated to include the latest technological changes and developments in the field
* includes end of chapter problems and an extensive bibliography
* an Invaluable text for all Materials Science students.
* a useful reference for physicists, chemists and engineers involved in the area of electroceramics.
Table of Contents:
Introduction.
Elementary Solid State Science.
Processing of Ceramics.
Ceramic Conductors.
Dielectrics and Insulators.
Piezoelectric Ceramics.
Pyroelectric Materials.
Electro-optic Ceramics.
Magnetic Ceramics.

[مشاهده فقط برای اعضا امکان پذیر است . برای ثبت نام اینجا کلیک کنید ...]

OR

[مشاهده فقط برای اعضا امکان پذیر است . برای ثبت نام اینجا کلیک کنید ...]

[asd1234]

Power Generation Handbook : Selection, Applications, Operation, Maintenance, 2002-08
Author: Philip Kiameh | ISBN: 0071396047 | Publisher: McGraw-Hill Professional | Number Of Pages: 560 | 5.5 mb | Html
We’ve all lived through long hot summers with power shortages, brownouts, and blackouts. But at last, all the what-to-do and how-to-do it information you’ll need to handle a full range of operation and maintenance tasks at your fingertips. Written by a power industry expert, Power Generation Handbook: Selection, Applications, Operation, Maintenance helps you to gain a thorough understanding of all components, calculations, and subsystems of the various types of gas turbines.
Table of Contents:
Chapter 1: Review of Thermodynamic Principles
Chapter 2: Steam Power Plants
Chapter 3: Steam Turbines and Auxiliaries
Chapter 4: Turbine Governing Systems
Chapter 5: Steam Chests and Valves
Chapter 6: Turbine Protective Devices
Chapter 7: Turbine Instrumentation
Chapter 8: Lubrication Systems
Chapter 9: Gland Sealing System
Chapter 10: An Overview of Gas Turbines
Chapter 11: Gas Turbine Compressors
Chapter 12: Gas Turbine Combustors
Chapter 13: Axial-Flow Turbines
Chapter 14: Gas Turbine Materials
Chapter 15: Gas Turbine Lubrication and Fuel Systems
Chapter 16: Gas Turbine Bearings and Seals
Chapter 17: Gas Turbine Instrumentation and Control Systems
Chapter 18: Gas Turbine Performance Characteristics
Chapter 19: Gas Turbine Operating and Maintenance Considerations
Chapter 20: Gas Turbine Emission Guidelines and Control Methods
Chapter 21: Combined Cycles
Chapter 22: Selection Considerations of Combined Cycles and Cogeneration Plants
Chapter 23: Applications of Cogeneration and Combined-Cycle Plants
Chapter 24: Cogeneration Application Considerations
Chapter 25: Economic and Technical Considerations for Combined-Cycle Performance — Enhancement Options
Chapter 26: Fundamentals of Electrical Systems
Chapter 27: Introduction to Machinery Principles
Chapter 28: Transformers
Chapter 29: Transformer Components and Maintenance
Chapter 30: Ac Machine Fundamentals
Chapter 31: Synchronous Generators
Chapter 32: Generator Components, Auxiliaries, and Excitation
Chapter 33: Generator Testing, Inspection, and Maintenance
Frequently Asked Questions

[مشاهده فقط برای اعضا امکان پذیر است . برای ثبت نام اینجا کلیک کنید ...]

[مشاهده فقط برای اعضا امکان پذیر است . برای ثبت نام اینجا کلیک کنید ...]

[asd1234]

ISBN: 0863413234
Title: Telecommunications Network Modelling, Planning and Design (BT Communications Technology)
Author: S. Evans
Publisher: Institution of Electrical Engineers
Publication Date: 2004-05
Number Of Pages: 240
8.0 Mb pdf
This book covers some of the major issues facing telecommunications network engineers and managers today. Topics covered include network planning for transmission systems, modelling of SDH transport network structures and telecommunications network design and performance modelling, as well as network costs and ROI modelling and QoS in 3G networks. This practical book will prove a valuable resource to network engineers and managers working in today’s competitive telecommunications environment.

[مشاهده فقط برای اعضا امکان پذیر است . برای ثبت نام اینجا کلیک کنید ...]

[asd1234]

ISBN: 0750662689
Title: Newnes Electrical Power Engineer’s Handbook, Second Edition
Author: Warne, D F
Publisher: Newnes
Publication Date: 2005-06-27
Number Of Pages: 480
Average Amazon Rating:
Editorial Description
The second edition of this popular engineering reference book, previously titles Newnes Electrical Engineer’s Handbook, provides a basic understanding of the underlying theory and operation of the major classes of electrical equipment. With coverage including the key principles of electrical engineering and the design and operation of electrical equipment, the book uses clear descriptions and logical presentation of data to explain electrical power and its applications. Each chapter is written by leading professionals and academics, and many sections conclude with a summary of key standards. The new edition is updated in line with recent advances in EMC, power quality and the structure and operation of power systems, making Newnes Electrical Power Engineer’s Handbook an invaluable guide for today’s electrical power engineer.
Collection name: Electronics & Electrical
Table of Contents
* Cover
* Frontmatter
o Half Title Page
o Title Page
o Copyright
o Contents
o Acknowledgements
* Chapter 1. Introduction
* Chapter 2. Principles of electrical engineering
o 2.1 Nomenclature and units
o 2.2 Electromagnetic fields
o 2.3 Circuits
o 2.4 Energy and power
o References
* Chapter 3. Materials for electrical engineering
o 3.1 Introduction
o 3.2 Magnetic materials
o 3.3 Insulating materials
o 3.4 Conducting materials
o Acknowledgement
o References
* Chapter 4. Measurements and instrumentation
o 4.1 Introduction
o 4.2 Pressure
o 4.3 Flow
o 4.4 Temperature
o 4.5 Position
o 4.6 Level
o 4.7 Weighing and force
o 4.8 Acceleration and speed
o 4.9 Current
o 4.10 HART and Fieldbus
o 4.11 Data acquisition
o 4.12 Installation notes
* Chapter 5. Generators
o 5.1 Introduction
o 5.2 Main generator types
o 5.3 Principles of operation
o 5.4 The Automatic Voltage Regulator (AVR)
o 5.5 Brushless excitation
o 5.6 Construction
o 5.7 Rating and specification
o 5.8 Testing
o 5.9 Standards
* Chapter 6. Transformers
o 6.1 Principles of operation
o 6.2 Main features of construction
o 6.3 Main classes of transformer
o 6.4 Rating principles
o 6.5 Test methods
o 6.6 Commissioning, maintenance and repair
o 6.7 Standards
* Chapter 7. Switchgear
o 7.1 Introduction
o 7.2 Principles of operation
o 7.3 Low-voltage switchgear
o 7.4 Medium-voltage (distribution) switchgear
o 7.5 High-voltage (transmission) switchgear
o 7.6 DC switchgear
o References
* Chapter 8. Fuses and protection relays
o 8.1 Protection and co-ordination
o 8.2 Fuses
o 8.3 Protection relays
o References
* Chapter 9. Wires and cables
o 9.1 Scope
o 9.2 Principles of power cable design
o 9.3 Main classes of cable
o 9.4 Parameters and test methods
o 9.5 Optical communication cables
o 9.6 Standards
o References
* Chapter 10. Motors, motor control and drives
o 10.1 Introduction
o 10.2 The direct current (DC) motor
o 10.3 The cage induction motor
o 10.4 The slipring induction motor
o 10.5 The ac synchronous motor
o 10.6 The brushless servomotor
o 10.7 The reluctance motor
o 10.8 The switched reluctance motor
o 10.9 Mechanical and duty cycle considerations
o 10.10 Drive power circuits
o 10.11 Effects of semiconductor power converters
o 10.12 The commercial drive
o 10.13 Standards
o References
* Chapter 11. Power electronic circuits and devices
o 11.1 Introduction
o 11.2 Diode converters
o 11.3 Active devices
o 11.4 Principles of switching circuits
o 11.5 High-frequency power supplies
o 11.6 Standards
o References
* Chapter 12. Batteries and fuel cells
o 12.1 Introduction
o 12.2 Primary cells
o 12.3 Secondary cells based upon aqueous electrolytes
o 12.4 Secondary lithium ion cells
o 12.5 Fuel cells
o 12.6 Battery charging
o 12.7 Battery monitoring
o 12.8 Installation, testing and commissioning
o 12.9 Operation and maintenance
o 12.10 Standards
o References
* Chapter 13. The power system
o 13.1 Introduction
o 13.2 Generation
o 13.3 Transmission
o 13.4 Distribution
o 13.5 De-regulation and privatization
o 13.6 Future trends
o References
* Chapter 14. Power quality and electromagnetic compatibility
o 14.1 Power quality
o 14.2 Electromagnetic compatibility
o 14.3 Standards
o References
* Chapter 15. Electricity and potentially explosive atmospheres
o 15.1 Introduction
o 15.2 EU directives
o 15.3 UK legislation
o 15.4 Area classification
o 15.5 Hazardous area equipment
o 15.6 Equipment selection
o 15.7 Equipment installation
o 15.8 Inspection and maintenance
o References
* Chapter 16. Principles of electrical safety
o 16.1 Injuries from electricity
o 16.2 Precautions against electric shock and contact burn injuries
o 16.3 Precautions against arc and flashover burn injuries
o 16.4 Precautions against fire
o 16.5 Precautions against explosions
o 16.6 Preventive maintenance and safe systems of work
o 16.7 Standards
o References

[مشاهده فقط برای اعضا امکان پذیر است . برای ثبت نام اینجا کلیک کنید ...]